Splashbacks and upstands in Arnos Grove

Yes. Arnos Grove is on the patch, and the postcodes we work here are N11, N14. It is worked on our north London run, along with the rest of Enfield. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. Upstands travel in a crate and can wait on the van, which gives some flexibility a full-height panel does not. That is why they are crated the way they are. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Permitted works hours are commonly weekdays with a late start and an early finish, so a one-day fit is planned around the porter and the lift. Boxed risers break the run into returns, and every return is a separate piece with its own mitred corner. The wall makes that decision, not the brochure. In a true galley the two runs have to be templated together - if one wall bows the gap closes and the appliance doors stop clearing.

Bowes Road and the North Circular approach carry heavy traffic with no stopping, so access comes off the quieter residential streets. Maisonettes have their own front door and a straight stair, usually with a tight turn at the top. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. Splashback panels are lighter than a worktop and far more awkward, because a tall thin piece has to be carried on edge and cannot be tilted to clear a turn. Joint positions follow from that.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. Splashbacks and upstands are cut from the same slab run at the same time, which is the only way the batch actually matches. Same batch, same run, same day. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. Socket and switch positions have to be final before templating, because a cut-out in the wrong place means a new piece. Siliconed to the worktop, never grouted.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. The same shape decides where splashback pieces break, and a joint in a corner reads as a detail while one in a clear run reads as a mistake. Corners get their own pieces. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. A tall panel that fits at the worktop will stand off the wall at the top unless the wall is dubbed out or the panel is scribed. Make the wall good first, or accept the detail. The riser boxing must be finished in its final form and any access panel positions agreed before the template, since the stone is set out around them. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. Splashbacks are cut from the same slab run as the tops, so they have to be decided before fabrication, not after. Decided before fabrication, not after.