Worktop installation in Barons Court

Yes. Barons Court is on the patch, and the postcodes we work here are W14. It is worked on our west London run, along with the rest of Hammersmith and Fulham. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The lift is a small passenger car with a gate, and the alternative is a stone stair winding round the shaft with a turn at every half-landing. This is the most managed day we do. That is the shape of the day. Old cage lifts here are for people, not stone - assume the stairs and plan a joint at the sink accordingly.

Purpose-built blocks with a communal front door, stone stairs and either no lift or a small original cage lift that is not rated for material loads. Streets around the squares are permit-only with narrow bays, and the squares themselves are private gardens so there is no vehicle route through - the carry is round the perimeter. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop splashbacks & upstands and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. Rushing that is what leaves a gap you look at every morning for fifteen years. Eased in, never forced. Have the works booking confirmed with the managing agent or porter in advance, with the lift slot and any parking permit or bay suspension in place. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.