Worktop replacement in Bedfont

Yes. Bedfont is on the patch, and the postcodes we work here are TW14. It is worked on our west London run, along with the rest of Hounslow. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

There is usually a shared rear alley, and whether the gate onto it is unlocked decides whether long pieces come in from the back. The junction between the old floor and the extension floor is where a run crossing it needs packing before stone goes on. What is under the old top is the real question. Much of the stock is rented, so the install happens with tenants in occupation and has to be finished and usable the same day.

Straightforward off the Staines Road with drives on most houses, though the airport perimeter and cargo-area traffic slow deliveries through the middle of the morning. A short hard approach with no steps means a full-length piece can be walked in flat by two people rather than turned up on edge. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop splashbacks & upstands. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. Going from a 38mm laminate to 20mm or 30mm stone drops the surface, which shows against tiles, a window board and any freestanding appliance. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Alcove pieces get cut oversize on both scribe edges, with the true wall angles carried on the template drawing rather than assumed. We would rather find it at template than on the morning, which is why the templater looks behind the units. Found at template, not on fit day. Unlock the side gate and clear the alley of bins, bikes and pots, and arrange a plumber for the sink and an electrician if the hob is hard-wired. Access in a tenanted flat depends on the tenant, so the template and fitting dates are agreed with whoever actually holds the keys. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. Units kept, surface changed.