Worktop replacement in Belsize Park

Yes. Belsize Park is on the patch, and the postcodes we work here are NW3. It is worked on our central and north London run, along with the rest of Camden. Enforcement zones rarely accept a trade van unloading stone as an exemption, so this gets sorted before the date is confirmed rather than argued about afterwards. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These kitchens are big rooms with long perimeter runs and an island, so level has to hold across the whole floor rather than along one wall. Any island overhang past about 300mm will not carry weight on the carcass alone, so flat steel bar or brackets have to be let into the units first, and that is agreed at template stage, not on fit day. What is under the old top is the real question. Conversion partitions are stud rather than brick, so check the fixing before cantilevering a peninsula off one, and expect the ceiling drops to force a lower splashback height than the client asked for.

CPZ enforced Monday to Friday with permit-only bays on the hill streets, and residents' parking around Haverstock Hill is effectively full all day. Communal front doors, no lifts in the villa conversions, and half-landing turns on the original staircases mean the tightest measurement is usually the return on the first-floor stair. A walk-up with winders at every half-landing means the piece is rested and re-gripped on the way, so the crew size goes up before the piece size comes down. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. It sets what the day actually looks like.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop installation. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

Peninsulas frequently land on a lightweight partition or on units that were never fixed down, and stone needs proper support under it before it goes on. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a partition has been built off the floor screed rather than off the slab, it moves, and a mitre bonded across that corner is the first thing to open. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. Found at template, not on fit day. Have a fitter or joiner fix and level the island units beforehand, and get the sink, taps, hob and any range on site before templating so we cut to the actual appliances. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Units kept, surface changed.