Worktop design and quotation in Blackfriars

Yes. Blackfriars is on the patch, and the postcodes we work here are EC4V, EC4Y. It is worked on our the City run, along with the rest of the Square Mile. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. Where a bay suspension or a permit is needed, that is a real cost and it goes on the quote instead of appearing later. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Floor-to-ceiling glazing lights the worktop from one side all day, which shows every ripple in a polished surface and every gap at a scribe. With the room square and the access managed, the material band you choose does most of the work in the total. That is what the itemised lines are for. Riverside peninsulas are seen from three sides, so pay for the extra polished edge and end profile rather than leaving a sawn edge facing the room.

Queen Victoria Street and the Embankment approaches are red route and bus-heavy with no stopping, so unloading is into a building's own basement bay or a booked side-street window, not the main road. Most buildings run a security desk with contractor sign-in, and the goods lift needs booking a few days ahead. A car that takes 2.4m on the diagonal will not take a three-metre worktop however it is stood, and there is no trimming it on the landing. We price the carry from what you tell us about the route, so photographs of the approach are worth more to us than a floor plan. Nothing about it gets estimated after the fact.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop installation, worktop fabrication and worktop replacement. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Itemised, so it can be compared honestly. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Material is the slab only, and it says so.

Peninsulas frequently land on a lightweight partition or on units that were never fixed down, and stone needs proper support under it before it goes on. Slab yield is worked out at quote stage, so if the layout forces a second slab you hear it before you commit rather than after. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Taped internal angles in plasterboard belly at the corner, so the run picks up a few millimetres over the last 300mm and a plan-angle mitre will not close. Send photographs of every corner of the room and it gets priced properly first time. Photographs are worth more than a plan here. Send a floor plan with the run lengths and confirm whether the existing units and sink are staying, along with the goods lift or loading bay rules if the building has any. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Written to be read by whoever is paying.