Worktop design and quotation in Farringdon

Yes. Farringdon is on the patch, and the postcodes we work here are EC1. It is worked on our north London run, along with the rest of Islington. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. It sits in the fitting line as time on site rather than as anything to do with the stone. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Steel columns and downstands land where the frame put them, which is frequently in the middle of what would otherwise be a clean run. Open-plan layouts mean long, uninterrupted runs and islands, so slab yield and whether we can nest those lengths dominates the material figure, and an intruding steel column or brick pier can force a scribe or a break in a run that otherwise would have been one clean piece. You see it before you commit to anything. These are fabrication jobs more than fitting jobs, with long single pieces, mitred edges and matched veining, so slab selection and layout deserve the time up front.

Congestion Charge zone, heavy weekday traffic, and buildings that open straight onto the pavement with no lay-by, so loading is a booked bay or an early slot. Service lifts are common and worth confirming in writing before anything is cut. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. Nothing about it gets estimated after the fact.

It is one of the three we do most here, behind worktop fabrication. Same template visit, same workshop, same installers either way. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Material is the slab only, and it says so. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly.

If the island is a few hundred millimetres longer than the usable length of a slab, a second slab gets bought to gain that overhang, and the whole slab is paid for rather than the part used. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

An intruding steel column, a brick pier or a downstand breaks a run that would otherwise have been one clean piece. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Photographs are worth more than a plan here. Send photos of the full route from where a van can park to the kitchen, including the goods lift and door widths, and tell us what the worktop is going back against. A let property is specified for durability and for a fixed window, and both of those are legitimate reasons to choose differently. Material is quoted as a supply range and the labour lines separately, because an installed rate per square metre is not a real number. Every line has a reason next to it.