Worktop design and quotation in Bunhill

Yes. Bunhill is on the patch, and the postcodes we work here are EC1Y, EC2A. It is worked on our north London run, along with the rest of Islington. Where the frontage is a clearway the unload happens away from the door and the carry gets longer, which is a crew and time question rather than a stone one. Where a bay suspension or a permit is needed, that is a real cost and it goes on the quote instead of appearing later. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Original brickwork is uneven by ten millimetres or more across a bay, so the back edge is scribed to the actual face rather than to a line. Open-plan layouts mean long, uninterrupted runs and islands, so slab yield and whether we can nest those lengths dominates the material figure, and an intruding steel column or brick pier can force a scribe or a break in a run that otherwise would have been one clean piece. That is what the itemised lines are for. Managing agents here run tight access rules, so confirm lift dimensions and protection requirements in writing at template stage rather than turning up with a full van.

Congestion Charge zone with red routes on City Road and Old Street, plus a low-traffic scheme covering the residential streets behind. Tower access runs through a booked service lift and an agreed delivery window with the managing agent. A car that takes 2.4m on the diagonal will not take a three-metre worktop however it is stood, and there is no trimming it on the landing. That is why the fitting line on a quote reflects manpower and time rather than square metres. You see that figure before we template, not after.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Exposed structure means the back edge is not a straight line at all, and a scribe of fifteen or twenty millimetres across a run is normal. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Photographs are worth more than a plan here. Send photos of the full route from where a van can park to the kitchen, including the goods lift and door widths, and tell us what the worktop is going back against. A let property is specified for durability and for a fixed window, and both of those are legitimate reasons to choose differently. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Nothing payable until template.