Worktop replacement in Borough

Yes. Borough is on the patch, and the postcodes we work here are SE1. It is worked on our south east London run, along with the rest of Southwark. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

External walls are thick and the run under the window sits in a deep reveal that has to be templated rather than assumed square. A full stone piece is several times the weight of the laminate coming out, and there is rarely room to turn it on a half-landing. Sound carcasses are the one condition. Listed and conservation frontages mean no hoisting through windows, so the piece has to be dimensioned around the tightest turn on the stair.

Conservation area frontages with railings, a lightwell and a steep flight down to the basement door, plus a strictly enforced CPZ - the practical route is often the front steps and a hall turn rather than any side access. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The strip-out is planned around it.

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Going from a 38mm laminate to 20mm or 30mm stone drops the surface, which shows against tiles, a window board and any freestanding appliance. Height change is checked before we cut. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. This is the commonest reason a replacement turns out to need more than a straight swap. Found at template, not on fit day. Get the managing agent's or freeholder's approval and the permitted hours confirmed beforehand, and agree with the porter who protects the communal carpet, stonework and lift. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. Sound carcasses are the condition.