Worktop replacement in Bankside

Yes. Bankside is on the patch, and the postcodes we work here are SE1. It is worked on our south east London run, along with the rest of Southwark. A dedicated loading bay or service yard is the easiest arrangement in a managed building, provided the slot is booked and someone has the key to the shutter. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Floor-to-ceiling glazing lights the worktop from one side all day, which shows every ripple in a polished surface and every gap at a scribe. The room itself is the easy part: walls are plumb, corners are square and the floor is flat, so scribes are minimal and joins can be tight. Units kept, surface changed, one day. Waterfall ends and mitred edges mean the fabrication tolerances matter more than the fitting - a 1mm out on the mitre shows on a 900mm drop.

Riverside towers with a single loading bay, booked service lift, protective floor coverings demanded by building management, and no kerbside anywhere near the entrance. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. That is agreed before a plumber is booked.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop fabrication, worktop installation and worktop design & quotation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. Going from a 38mm laminate to 20mm or 30mm stone drops the surface, which shows against tiles, a window board and any freestanding appliance. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Book the service lift, loading bay and concierge access for the full day, and confirm the building's permitted working hours in writing. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. Sound carcasses are the condition.