Worktop replacement in Canons Park

Yes. Canons Park is on the patch, and the postcodes we work here are HA8, HA7. It is worked on our north west London run, along with the rest of Harrow. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. It is a full day at the kerb, not a delivery. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

In the 1930s blocks the kitchen window sits low and the original tiled splashback is bedded thick, so allow for hacking off before the upstand can sit flush.

Wide roads with verges and drives on the houses, and the flat blocks have generous communal entrances but low-headroom stairwells that decide how a slab is turned. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop splashbacks & upstands. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a run finishes into a reveal, the depth of that reveal is taken at worktop height and nowhere else. We would rather find it at template than on the morning, which is why the templater looks behind the units. It is the usual surprise, and it is a known one. Get the managing agent's or freeholder's approval and the permitted hours confirmed beforehand, and agree with the porter who protects the communal carpet, stonework and lift. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. Sound carcasses are the condition.