Worktop installation in Crayford

Yes. Crayford is on the patch, and the postcodes we work here are DA1. It is worked on our south east London run, along with the rest of Bexley. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Steel columns and downstands land where the frame put them, which is frequently in the middle of what would otherwise be a clean run. These read as easy from the outside and rarely are. The slow parts are slow for a reason. The old works terraces have very low ceilings in the rear addition, check head height over the run before specifying tall upstands or a splashback.

The town is split by the main road and the river, with a steep hill up from the high street and terraced streets parked nose-to-tail; the riverside blocks have their own gated parking. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop fabrication. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly.

The free end is what needs deciding early: square edge, mitred apron down the end, or a full waterfall to the floor, and a waterfall is cut in sequence off the same part of the slab. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Confirm loading bay access and lift booking with the building's management, and clear any furniture from the mezzanine stairs or split-level approach. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.