Worktop replacement in Crayford

Yes. Crayford is on the patch, and the postcodes we work here are DA1. It is worked on our south east London run, along with the rest of Bexley. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The goods lift is generous and the flat entrance often is not, so the tightest point on the route is inside the flat rather than in the building. Many of these kitchens are island pods in the middle of an open plan with waste and feeds coming up through the floor, so the island cannot be nudged to suit the stone and the stone gets cut to suit the island. Units kept, surface changed, one day. The old works terraces have very low ceilings in the rear addition, check head height over the run before specifying tall upstands or a splashback.

The town is split by the main road and the river, with a steep hill up from the high street and terraced streets parked nose-to-tail; the riverside blocks have their own gated parking. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop fabrication. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

A peninsula is an island with one end tied to a run, which means the join between them has to be planned rather than allowed to happen. Going from a 38mm laminate to 20mm or 30mm stone drops the surface, which shows against tiles, a window board and any freestanding appliance. Height change is checked before we cut. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Book the goods lift and loading bay for the day, clear a straight route through the open plan, and have a plumber on hand for the island services coming up through the floor. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. Units kept, surface changed.