Worktop installation in East Acton

Yes. East Acton is on the patch, and the postcodes we work here are W3. It is worked on our west London run, along with the rest of Ealing. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Walls are dense block or in-situ concrete with a bonded plaster, so the bottom course of tiles brings plaster with it when the old top comes off. Deck access or a single narrow staircase with tight half-landings means long pieces get walked up on edge, and the landing turn is checked before we commit. Walked, measured, protected, then lifted. These rear kitchens are shallow, so once the 600mm units and top are in you have under a metre of floor left, which makes the fit sequence matter more than usual.

Cottage-estate roads are narrow with cars parked both sides, and East Acton Lane is the only proper through route. The A40 is close but the turnings off it are limited. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

Where the return runs into a wall that is out of square, the corner is templated as the angle it really is rather than as ninety degrees. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. Floors and units are protected before anything comes through the door, communal or otherwise. Access for the whole slot, or a different day.