Worktop installation in Park Royal

Yes. Park Royal is on the patch, and the postcodes we work here are NW10, W3. It is worked on our north west London run, along with the rest of Brent. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Poured screed over steel decking can fall away across a long run, so level is checked across the whole room before anything is packed. The goods lift is often industrial and generous, but the flat entrance and any internal turn into a mezzanine or split level can be tighter than anything in the building, so we walk the full route with a tape before unloading. Walked, measured, protected, then lifted. This is the collection end of the job rather than the fitting end, and a slab picked up here still has to survive the North Circular before it reaches a kitchen.

Wide industrial roads, forklift-friendly yards and A-road access, which is exactly why the supply chain sits here. Domestic drops at the edges are ordinary kerbside jobs, but weekday HGV traffic around the estate makes timing slots unreliable. Even an easy kerbside carry wants the pavement clear at the tail lift, because a three-metre piece on edge has a swing radius nobody expects until it is swinging. The fitting day is planned backwards from that point, before anything comes off the van. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop fabrication. Same template visit, same workshop, same installers either way. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Exposed structure means the back edge is not a straight line at all, and a scribe of fifteen or twenty millimetres across a run is normal. Rushing that is what leaves a gap you look at every morning for fifteen years. Eased in, never forced. Confirm loading bay access and lift booking with the building's management, and clear any furniture from the mezzanine stairs or split-level approach. Quartz is the sensible default in a rental: nothing to seal, nothing to maintain, and nothing an incoming tenant needs briefing on. Floors and units are protected before anything comes through the door, communal or otherwise. Access for the whole slot, or a different day.