Worktop templating in Park Royal

Yes. Park Royal is on the patch, and the postcodes we work here are NW10, W3. It is worked on our north west London run, along with the rest of Brent. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Original brickwork is uneven by ten millimetres or more across a bay, so the back edge is scribed to the actual face rather than to a line. Where a column, downstand or steel plate lands in the run, the template plots its actual outline so the stone is cut to fit around it instead of being stopped short and filled. Recorded as it is, not as it was drawn. This is the collection end of the job rather than the fitting end, and a slab picked up here still has to survive the North Circular before it reaches a kitchen.

Wide industrial roads, forklift-friendly yards and A-road access, which is exactly why the supply chain sits here. Domestic drops at the edges are ordinary kerbside jobs, but weekday HGV traffic around the estate makes timing slots unreliable. The van gets close to the door and the stone comes off the tail lift onto a trolley, which is about the shortest carry we ever get. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions.

It is one of the three we do most here, behind worktop fabrication. Same template visit, same workshop, same installers either way. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. The template visit is booked once the units are genuinely in, not when they are nearly in. The room as it is, not as it was drawn.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. A layout templated off one wall instead of one datum will not sit right once all the pieces are down together. Real angles, not plan angles. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a column lands in the run the template plots its actual outline so the stone is cut to fit around it rather than stopped short and filled. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Measured at worktop height, nowhere else. Units fixed and levelled, all steelwork and brick cleaned, sealed and finished, and any boarded sections completed to final thickness so the template picks up the surface the stone will actually meet. A let property is specified for durability and for a fixed window, and both of those are legitimate reasons to choose differently. The templater needs the sink, tap and hob on site, and a Belfast sink installed at its final height. Fitted, fixed and level, then we come.