Splashbacks and upstands in Park Royal

Yes. Park Royal is on the patch, and the postcodes we work here are NW10, W3. It is worked on our north west London run, along with the rest of Brent. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. Upstands travel in a crate and can wait on the van, which gives some flexibility a full-height panel does not. One trip is always better than three. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Steel columns and downstands land where the frame put them, which is frequently in the middle of what would otherwise be a clean run. Setting proud is usually the better call: it reads as a deliberate detail rather than a bad fit, and it avoids trying to scribe stone to a surface that has no consistent plane. Decided before fabrication starts. This is the collection end of the job rather than the fitting end, and a slab picked up here still has to survive the North Circular before it reaches a kitchen.

Wide industrial roads, forklift-friendly yards and A-road access, which is exactly why the supply chain sits here. Domestic drops at the edges are ordinary kerbside jobs, but weekday HGV traffic around the estate makes timing slots unreliable. Even an easy kerbside carry wants the pavement clear at the tail lift, because a three-metre piece on edge has a swing radius nobody expects until it is swinging. Where the route is tight we break a long splashback at a natural vertical joint instead of forcing one panel through. It decides panel size before anything is cut.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop fabrication, worktop templating and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Ordered later from a different batch, the match is not reliable exactly where the pieces meet. Same batch, same run, same day. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. Socket and switch positions have to be final before templating, because a cut-out in the wrong place means a new piece. Sockets final before template.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Long runs almost never take a single panel, so the joint positions want agreeing before anything is templated. Corners get their own pieces. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a column lands in the run the template plots its actual outline so the stone is cut to fit around it rather than stopped short and filled. It is usually what pushes a job towards a 100mm upstand instead of a full-height panel, because an upstand rides what a panel exposes. An upstand rides what a panel exposes. Decide and build the backing method, scribe, subframe or board, before the template, because the templater is measuring to that face and not to the brick. A let property is specified for durability and for a fixed window, and both of those are legitimate reasons to choose differently. Full-height panels need the wall made good first, which is another trade and another timescale. The wall has to be ready.