Worktop installation in Harlesden

Yes. Harlesden is on the patch, and the postcodes we work here are NW10. It is worked on our north west London run, along with the rest of Brent. Loading exemptions on red routes are narrow, time-limited and heavily camera-enforced, so we plan around them rather than relying on them. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A long piece has to come through the front door, down the hall, round the newel post and through a doorway with a step down into the addition. The day is planned backwards from the hall. Walked, measured, protected, then lifted. Back-addition kitchens are rarely square to the main house, so expect a taper across a 3m run and template the whole piece as one rather than assuming a right angle at the return.

No driveways to speak of, red route and bus lane restrictions on the main roads, and controlled parking on almost every side street, so a dispensation or a very early start is usually needed to get the van close enough for a hall carry. Door width, hall width and the diagonal at the turn are three separate measurements, and it is the diagonal that catches people out. We walk the route with a tape and protect it end to end before the first piece is lifted. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly.

The return piece is the awkward one on a slab: short, full depth, and rarely nesting neatly against the long lengths, so yield rather than area is what moves the material figure. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Walls that bow along their length are the normal condition rather than the exception, and a straight-cut back edge will show a shadow gap at one end and touch at the other. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Consent for the work sits with the freeholder or the managing body, and getting it in writing first avoids a crew arriving to a locked door. The fitting day is arranged with whoever can actually give us access for the whole slot. One visit, our own installers.