Worktop replacement in Enfield Lock

Yes. Enfield Lock is on the patch, and the postcodes we work here are EN3. It is worked on our north London run, along with the rest of Enfield. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A riverside block is a managed building with a booked goods lift, a loading bay and a concierge, and all three have to line up on the same day. Housings set out for a 38mm laminate change clearance when you drop to 20mm or 30mm stone, and that is checked before cutting. What is under the old top is the real question. Ceilings and window reveals are low in these units - measure the upstand height at the window cill, it is frequently under 100mm.

The Island is reached over a small number of bridged access roads with tight turning heads and resident-only bays, so plan the van position before you arrive rather than driving round. Everything comes through the front door and down the hall, so the tightest point on the route is usually the newel post at the foot of the stairs. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. It sets what the day actually looks like.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop splashbacks & upstands and worktop installation. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A plumber either side of us. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a run finishes into a reveal, the depth of that reveal is taken at worktop height and nowhere else. We would rather find it at template than on the morning, which is why the templater looks behind the units. Found at template, not on fit day. Book the service lift, loading bay and concierge access for the full day, and confirm the building's permitted working hours in writing. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Sound carcasses are the condition.