Worktop installation in Enfield Lock

Yes. Enfield Lock is on the patch, and the postcodes we work here are EN3. It is worked on our north London run, along with the rest of Enfield. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Floor-to-ceiling glazing lights the worktop from one side all day, which shows every ripple in a polished surface and every gap at a scribe. Everything comes up in the lift, so we measure the lift car's internal diagonal before the piece is loaded, because a car that takes 2.4m on the diagonal will not take a 3m worktop no matter how you stand it. Walked, measured, protected, then lifted. Ceilings and window reveals are low in these units - measure the upstand height at the window cill, it is frequently under 100mm.

The Island is reached over a small number of bridged access roads with tight turning heads and resident-only bays, so plan the van position before you arrive rather than driving round. Door width, hall width and the diagonal at the turn are three separate measurements, and it is the diagonal that catches people out. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional. Developer-fitted kitchens come with thin cam-lock carcasses, which are fine under laminate and want bracing before stone goes on them. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A low sill over the sink run is what decides between an upstand and stone dying into a window board, and there is often less clearance than an upstand is tall. The back edge is eased in progressively rather than offered up once and forced. Dry-lay, mark, cut, then bond. Book the service lift and loading bay with the building manager for the whole fitting window, and have the fob or key for lift override ready. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. Floors and units are protected before anything comes through the door, communal or otherwise. Protection goes down first.