Worktop replacement in Fitzrovia

Yes. Fitzrovia is on the patch, and the postcodes we work here are W1T, W1W. It is worked on our central and north London run, along with the rest of Camden. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The stair from the street is narrow with a tight turn at the top, which caps piece length well below anything the run itself needs. Post-war terraces have small, roughly square kitchens with a back door and a window in the middle of the run, so runs are short and joins are rare, but there are usually two corners and a window cill to work around in a couple of metres. What is under the old top is the real question. In the converted commercial buildings a full-length slab usually goes up in the goods lift, so check it before templating instead of designing in joins you do not need.

Congestion Charge zone, Monday to Saturday controlled parking, delivery restrictions on the busier streets, and buildings that open straight onto the pavement with no forecourt. The converted commercial buildings have goods lifts worth booking, while the Georgian above-shop flats have none at all. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. That is agreed before a plumber is booked.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop installation, worktop fabrication and worktop design & quotation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. This is the commonest reason a replacement turns out to need more than a straight swap. Found at template, not on fit day. Empty the base units completely and have a plumber disconnect the sink, tap and any washing machine plumbed in under the worktop before we arrive. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Plumber either side of us.