Worktop design and quotation in Fitzrovia

Yes. Fitzrovia is on the patch, and the postcodes we work here are W1T, W1W. It is worked on our central and north London run, along with the rest of Camden. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. It sits in the fitting line as time on site rather than as anything to do with the stone. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The stair from the street is narrow with a tight turn at the top, which caps piece length well below anything the run itself needs. Runs are short, joins are few and the biggest single question is whether we can go in through the back, a rear door straight from the garden into the kitchen usually lets us fit long pieces whole, whereas a mid-terrace with no side gate means everything comes through the front and may need splitting. That is what the itemised lines are for. In the converted commercial buildings a full-length slab usually goes up in the goods lift, so check it before templating instead of designing in joins you do not need.

Congestion Charge zone, Monday to Saturday controlled parking, delivery restrictions on the busier streets, and buildings that open straight onto the pavement with no forecourt. The converted commercial buildings have goods lifts worth booking, while the Georgian above-shop flats have none at all. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. We price the carry from what you tell us about the route, so photographs of the approach are worth more to us than a floor plan. It appears as its own line rather than buried in a rate.

It is one of the three we do most here, behind worktop installation. Same template visit, same workshop, same installers either way. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Itemised, so it can be compared honestly.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. This is the item most often left out of a cheaper quote, and it comes back as a variation once the templater has been. Priced as fabrication, not as area. Tell us whether there is side or rear access to the kitchen from outside, and send the run lengths with a photo of the window and boiler positions. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Every line has a reason next to it.