Kitchen worktops in Fortis Green

Yes. Mix of small Victorian cottages with 2.4m kitchens and interwar estate houses where the standard job is a modest rear extension producing an L-shape with a breakfast bar rather than a full island. Family kitchen-diners rather than showpieces. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap.

Victorian cottage, Edwardian semi and 1920s Coldfall estate house. A bay-fronted terrace has a long hall running past the stairs to the kitchen, so the hall turn caps the piece length before the run length does. The day is planned backwards from the hall. That is the shape of the day.

Fortis Green road itself is narrow with parking both sides and a constant flow of buses, so unloading is a two-minute job then move the van. The estate streets are flatter and easier than the rest of N10. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Worktop replacement, worktop templating and worktop installation, in that order. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. The interwar estate houses have shallow 550mm base units in places - check the depth before ordering, a standard 620mm top leaves a bigger overhang than the client expects.

Where the return runs into a wall that is out of square, the corner is templated as the angle it really is rather than as ninety degrees. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Measured at worktop height, nowhere else. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.