Worktop installation in Fortis Green

Yes. Fortis Green is on the patch, and the postcodes we work here are N10, N2. It is worked on our north London run, along with the rest of Haringey. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A bay-fronted terrace has a long hall running past the stairs to the kitchen, so the hall turn caps the piece length before the run length does. The day is planned backwards from the hall, and the scribing takes longer than the carry. The slow parts are slow for a reason. The interwar estate houses have shallow 550mm base units in places - check the depth before ordering, a standard 620mm top leaves a bigger overhang than the client expects.

Fortis Green road itself is narrow with parking both sides and a constant flow of buses, so unloading is a two-minute job then move the van. The estate streets are flatter and easier than the rest of N10. Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. The fitting day is planned backwards from that point, before anything comes off the van. None of it is worked out on the doorstep.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a corner is a couple of degrees off, a mitre cut to a theoretical ninety degrees opens on the wall side and there is no closing it afterwards. The back edge is eased in progressively rather than offered up once and forced. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.