Worktop design and quotation in Friday Hill

Yes. Friday Hill is on the patch, and the postcodes we work here are E4. It is worked on our east London run, along with the rest of Waltham Forest. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. It sits in the fitting line as time on site rather than as anything to do with the stone. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Deck access means a long open walkway from the lift or the stair to the front door, and that walk happens with the piece on edge in whatever weather there is. Templating, fabrication and fitting are the same day's work whether the kitchen is five square metres or eight, so on a small kitchen they are a larger share of the total, and one slab covers the lot, which makes the material band the main lever you actually control. That is what the itemised lines are for. Upper maisonettes are an external stair carry with an outside turn at the top, so wet weather changes the plan more than the dimensions do.

Estate roads are wide with communal parking and grass verges, and many houses retain a side gate, so the physical access is easy. Maisonette blocks have an external stair to the upper unit and no lift, meaning first-floor kitchens are a stair carry. Stone goes up on edge, and it is the half-landing turn rather than the flight itself that sets the maximum piece. That is why the fitting line on a quote reflects manpower and time rather than square metres. It appears as its own line rather than buried in a rate.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Material is the slab only, and it says so.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. This is the item most often left out of a cheaper quote, and it comes back as a variation once the templater has been. Photographs are worth more than a plan here. Send the run lengths plus a photo of every corner of the kitchen so we can spot boxed ducts, and tell us whether the sink is staying in the same position. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. Material is quoted as a supply range and the labour lines separately, because an installed rate per square metre is not a real number. Nothing payable until template.