Worktop templating in Friday Hill

Yes. Friday Hill is on the patch, and the postcodes we work here are E4. It is worked on our east London run, along with the rest of Waltham Forest. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. A templater circling for a space arrives late into a slot that was already tight, and the drawing is what suffers. Two hours is the realistic figure. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Deck access means a long open walkway from the lift or the stair to the front door, and that walk happens with the piece on edge in whatever weather there is. Carcass heights are read individually, since legs bottoming out on concrete mean the units do not share one plane. Recorded as it is, not as it was drawn. Upper maisonettes are an external stair carry with an outside turn at the top, so wet weather changes the plan more than the dimensions do.

Estate roads are wide with communal parking and grass verges, and many houses retain a side gate, so the physical access is easy. Maisonette blocks have an external stair to the upper unit and no lift, meaning first-floor kitchens are a stair carry. Stone goes up on edge, and it is the half-landing turn rather than the flight itself that sets the maximum piece. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. The template visit is booked once the units are genuinely in, not when they are nearly in. Units fitted, fixed and level first.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. The template records every angle in that shape as it actually is rather than as the plan drew it. Real angles, not plan angles. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. One measurement never describes it, which is why a tape reading taken before the visit rarely matches the template. Plotted, not estimated. Every base unit fixed to the wall, packed and levelled, and any dry-lining or patching completed - the template reads the wall face it is given, so that has to be the finished face. Consent for the work sits with the freeholder or the managing body, and getting it in writing first avoids a crew arriving to a locked door. The template happens when the units are in, fixed and level, whoever is fitting them. Fitted, fixed and level, then we come.