Worktop replacement in Fullwell Cross

Yes. Fullwell Cross is on the patch, and the postcodes we work here are IG6. It is worked on our east London run, along with the rest of Redbridge. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These are built in dense concrete, so support for a peninsula or an end panel goes in with proper anchors rather than plugs. Ex-council flats and maisonettes are built in dense concrete and blockwork, so anything that has to be fixed back, such as brackets under a peninsula or support for an end panel, goes in with proper anchors and an SDS rather than plasterboard fixings. Units kept, surface changed, one day. For anything above ground floor here we measure the stair turn first, a 3m piece will not make the bend, so we plan a joint rather than find out on delivery day.

Residential roads are fine and most houses have a drive, but the maisonettes above and behind the parade mean a straight-flight staircase carry with a half-landing turn that limits what length we can get up in one piece. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop installation. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Sort a parking bay or permit near the entrance, confirm the lift is in service and get us the door codes, and tell us about any asbestos survey on the flat before we start stripping out. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Units kept, surface changed.