Worktop design and quotation in Gloucester Road

Yes. Gloucester Road is on the patch, and the postcodes we work here are SW7. It is worked on our west London run, along with the rest of Kensington and Chelsea. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. It sits in the fitting line as time on site rather than as anything to do with the stone. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

External walls are thick and the run under the window sits in a deep reveal that has to be templated rather than assumed square. If the diagonal of the car will not take a full-length piece, the worktop gets designed around the lift rather than around the room, which means extra joins, worse nesting on the slab and sometimes a second slab bought to produce the same kitchen in more pieces. Priced from the building, not from a rate card. Old service lifts are the hard limit on this street - if the car will not take it, the joint gets designed around the lift, not around the kitchen.

Blocks here have a front porter's desk and a separate tradesman's entrance round the side, and materials go in the service lift only, with protective blankets on the walls. The lifts are old, often around 1000mm by 1300mm internally with a low car ceiling, which caps a stood-on-edge slab at roughly 2.2-2.4m unless the stairs are used instead. A car that takes 2.4m on the diagonal will not take a three-metre worktop however it is stood, and there is no trimming it on the landing. That is why the fitting line on a quote reflects manpower and time rather than square metres. It appears as its own line rather than buried in a rate.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Itemised, so it can be compared honestly. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so.

The return piece is the awkward one on a slab: short, full depth, and rarely nesting neatly against the long lengths, so yield rather than area is what moves the material figure. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Priced as fabrication, not as area. Measure the internal lift car, width, depth and height, and photograph the stair turn and landing doors, then send those with the run lengths. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Written to be read by whoever is paying.