Worktop fabrication in Golders Green

Yes. Golders Green is on the patch, and the postcodes we work here are NW11. It is worked on our north London run, along with the rest of Barnet. Enforcement zones rarely accept a trade van unloading stone as an exemption, so this gets sorted before the date is confirmed rather than argued about afterwards. Pieces are loaded in reverse fitting order so the first thing off the van is the first thing that goes down. It is decided in the yard, not at the kerb. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

External walls are thick and the run under the window sits in a deep reveal that has to be templated rather than assumed square. Ceilings are high and external walls are thick, so the run under the window sits in a deep reveal and the back edge has to be templated to the reveal rather than assumed square. Every join over a gable, clear of every cut-out. Kosher layouts must be agreed before templating because the meat and dairy split changes sink positions, drainer grooves and joint locations across the whole kitchen.

Mansion blocks with small original lifts, stone stairs and porters, plus permit parking that is full by mid-morning along the main roads. Houses off the side streets have driveways, but the mansion flats are the defining access problem. The lift has to be booked and blanketed before anything moves, and that booking needs to cover the old tops coming out as well as the new stone going in. Getting that wrong leaves a finished, machined piece that cannot reach the room, which is a remake rather than a trim. It is settled on the bench, not on site.

It is one of the three we do most here, behind worktop design & quotation. Same template visit, same workshop, same installers either way. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. Cutting several kitchens from different slabs and calling them matched is where firms get caught out. Nested for the job in front of us. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Pieces are dry-assembled and checked on the bench before anything is loaded. Same slab run, or it is not a match.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. That is nested before any glass goes on the saw. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. Internal corners are machined with a radius and polished, and kept well clear of any join or cut-out. Radiused, polished, and clear of the joins. Access arrangements and the porter's permitted hours need confirming before we cut, because the agreed piece size is what the nesting is built around. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. Changing an appliance after the nest is set means recutting the piece, not adjusting it. The approved drawing is the instruction.