Worktop design and quotation in Goodmayes

Yes. Goodmayes is on the patch, and the postcodes we work here are IG3. It is worked on our east London run, along with the rest of Redbridge. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. It sits in the fitting line as time on site rather than as anything to do with the stone. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Deep original skirting is often left in behind the units, standing them off the wall, so the back edge of the stone is plotted where the carcasses actually sit. The second thing is the carry route: front door, narrow hall, a turn at the stairs and often a step down into the extension, which can mean a piece that would template in one length has to be split to physically get into the room. You see it before you commit to anything. Range cookers dominate here and the cut-outs sit close to end walls, so we check the actual cooker width on site instead of working off the plan measurement.

Mixed: terraces on the south side with kerbside-only unloading, and 1930s roads to the north where most houses have a crossover and a hardstanding to park on. Rear extensions usually leave a usable side alley of around a metre. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. It appears as its own line rather than buried in a rate.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Itemised, so it can be compared honestly. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Material is the slab only, and it says so.

With three walls in play the chance of one of them being out of square is high, and the template has to carry all three angles. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. Send photographs of every corner of the room and it gets priced properly first time. Photographs are worth more than a plan here. Send us the run lengths, plus photos taken walking from the pavement through the hall to the kitchen so we can see the door widths and the stair turn. An owner living in the house makes the decisions and lives with them, so the specification tends to go towards the material rather than towards the lowest total. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Nothing payable until template.