Kitchen worktops in Hampton Hill

Yes. A high street of Victorian shops and cottages with tight first-floor flats, and behind it Victorian terraces and interwar semis where the kitchen is a rear room of roughly 2.6m by 3.5m, generally refitted in place with an L of 3m and 1.8m. A front drive is the best thing that can happen to a fitting day, because the tail lift comes down within a few metres of the door and nothing is on a clock. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is.

Victorian terrace, Victorian villa, 1930s semi and modern flats over shops. Working hours are constrained by the business underneath, so noisy work has a window rather than a day. Access is generally through the front door and a short straight hall into the kitchen, which is a good deal kinder than a Victorian terrace, though rear access through a back garden or shared path is often the better route if it exists. That is the shape of the day.

High Street loading is timed and the parade is busy, so flats above shops mean a street door, a straight steep stair and a right-angle turn at the top; the residential roads behind have driveways and are far easier. A walk-up with winders at every half-landing means the piece is rested and re-gripped on the way, so the crew size goes up before the piece size comes down. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

Worktop replacement, worktop installation and worktop templating, in that order. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Flats above the shops have a stair with a tight top landing, so anything over 2.4m has to be jointed - measure the landing, not just the stair width.

Where the return runs into a wall that is out of square, the corner is templated as the angle it really is rather than as ninety degrees. A layout templated off one wall instead of one datum will not sit right once all the pieces are down together. Real angles, not plan angles. A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Measured at worktop height, nowhere else. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Sound carcasses are the condition. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.