Kitchen worktops in Harrow Road

Yes. Mostly estate flats and maisonettes with small purpose-built kitchens - a 2.1m to 2.6m run, a return under the window, and no dishwasher space unless a unit comes out. Refits are usually driven by a landlord programme, so the spec is standardised across several flats at once. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is.

post-war council block, 1970s low-rise estate, Victorian terrace and flat above shop. The internal stair is usually a straight flight with a tight top landing, and it is the landing rather than the flight that is the limit. Ex-council flats and maisonettes are built in dense concrete and blockwork, so anything that has to be fixed back, such as brackets under a peninsula or support for an end panel, goes in with proper anchors and an SDS rather than plasterboard fixings. Units kept, surface changed, one day.

Estates along the road use deck walkways, communal fob doors and lifts with a small car, and the road itself has bus lanes and few loading opportunities. Bin stores and bike racks routinely block the shortest route to the block entrance. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The strip-out is planned around it.

Worktop replacement, worktop installation and worktop templating, in that order. Small kitchens in a shared house are all short runs and tight cut-out spacing, which is more bench work per square metre than one large kitchen would be. The template visit is booked once the units are genuinely in, not when they are nearly in. Units fitted, fixed and level first. Batch refits mean repeated identical layouts, so it is worth templating two or three flats in one visit - just check each one, the concrete openings vary by 10-20mm between units.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. The template happens when the units are in, fixed and level, whoever is fitting them. Fitted, fixed and level, then we come. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.