Worktop installation in Hendon

Yes. Hendon is on the patch, and the postcodes we work here are NW4. It is worked on our north London run, along with the rest of Barnet. A front drive is the best thing that can happen to a fitting day, because the tail lift comes down within a few metres of the door and nothing is on a clock. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These kitchens are full of boxed soil stacks, gas risers and heating pipework, and the boxing usually stops short of the ceiling. The porter has to be booked, the goods lift protected with the block's own blankets or our own boards, and communal carpet and stair runners covered from the entrance to the flat door before a single piece moves. That is the shape of the day. Mansion block lifts are the limiting factor, and where a slab will not fit the lift a stone staircase carry needs proper protection to the treads and the handrail.

Suburban streets with drives on the semis, but the mansion blocks have narrow original lifts, half-landings and stone communal stairs, and parking around Hendon Central and Brent Street is tight through the day. A walk-up with winders at every half-landing means the piece is rested and re-gripped on the way, so the crew size goes up before the piece size comes down. We walk the route with a tape and protect it end to end before the first piece is lifted. That is what the morning is planned around.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop replacement and worktop templating. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. One visit, with the sink and hob seated and sealed before we leave. One visit, done properly. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Sill height gets settled with the template on site, because it is one of the few dimensions nobody has measured before we arrive. Rushing that is what leaves a gap you look at every morning for fifteen years. It is the slow part of the day and it should be. Have the works booking confirmed with the managing agent or porter in advance, with the lift slot and any parking permit or bay suspension in place. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. Floors and units are protected before anything comes through the door, communal or otherwise. Access for the whole slot, or a different day.