Worktop installation in Hounslow Heath

Yes. Hounslow Heath is on the patch, and the postcodes we work here are TW4. It is worked on our west London run, along with the rest of Hounslow. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The internal stair is usually a straight flight with a tight top landing, and it is the landing rather than the flight that is the limit. The stairwell half-landing is usually the tightest point on the whole route and it dictates the maximum piece. The slow parts are slow for a reason. These kitchens are almost never square and the walls are dense concrete, so expect to scribe both ends and drill rather than chase for an upstand.

Estate roads with parking courts, bollards and tight turning heads, and some blocks are walk-up with access along an external deck. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Walls that bow along their length are the normal condition rather than the exception, and a straight-cut back edge will show a shadow gap at one end and touch at the other. The back edge is eased in progressively rather than offered up once and forced. Dry-lay, mark, cut, then bond. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Access for the whole slot, or a different day.