Worktop replacement in Imperial Wharf

Yes. Imperial Wharf is on the patch, and the postcodes we work here are SW6. It is worked on our west London run, along with the rest of Hammersmith and Fulham. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Sintered stone and thin porcelain are the usual upgrade here, and those need a rigid transport frame and a full set of suction lifters - they do not forgive being flexed on a long corridor carry.

Gated estate with a security barrier, contractor registration, a designated loading bay and a goods lift that must be booked and lined before use, plus estate rules on working hours. From the lift lobby the route to the flat is a long carpeted corridor across a podium, so floor protection is mandatory and the trolley run is significant. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. That is agreed before a plumber is booked.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop fabrication. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. The carcasses have to be sound, because stone is several times the weight of what is coming off. Sound carcasses or it does not go ahead. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. Going from a 38mm laminate to 20mm or 30mm stone drops the surface, which shows against tiles, a window board and any freestanding appliance. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Book the service lift, loading bay and concierge access for the full day, and confirm the building's permitted working hours in writing. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed.