Kitchen worktops in Lisson Grove

Yes. High-density estate housing with standardised kitchens - a 2.4m run against a concrete wall, a return under the window, and a boxed-in service riser in one corner that cannot move. Replacement work is usually one flat at a time within an occupied block. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. The waste run is planned, not improvised.

post-war council tower, 1960s slab block and Victorian terrace. Rear access through a garden or a shared path means long pieces can usually come in whole from the back. The carry is the constraint. Walked, measured, protected, then lifted.

Towers with a single residents' lift, controlled entry, and long internal corridors from the lift to the flat door. Estate roads have resident-only bays with active enforcement, and the Marylebone Road end has no stopping at all. The lift has to be booked and blanketed before anything moves, and that booking needs to cover the old tops coming out as well as the new stone going in. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

Worktop replacement, worktop installation and worktop splashbacks & upstands, in that order. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Concrete walls mean no chasing and no easy fixing - upstands get bonded rather than screwed, and any island needs a floor-fixed frame because you will not get a decent fixing into the wall.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. The same shape decides where splashback pieces break, and a joint in a corner reads as a detail while one in a clear run reads as a mistake. Corners get their own pieces. A boxed soil stack or service riser in the corner of a run eats into the worktop depth and has to be scribed around rather than cut square. It is usually what pushes a job towards a 100mm upstand instead of a full-height panel, because an upstand rides what a panel exposes. An upstand rides what a panel exposes. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

These kitchens tend to be compact and reasonably square, so the fixed template, fabrication and fitting lines are a larger share of the total than the stone is. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Sound carcasses are the condition. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.