Worktop design and quotation in Little Venice

Yes. Little Venice is on the patch, and the postcodes we work here are W9. It is run from the Watford side, covering Hertfordshire & North London. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. It sits in the fitting line as time on site rather than as anything to do with the stone. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Conservation and listing conditions are common, which affects what can be altered around the kitchen rather than what stone goes on the units. Big islands are what drive the number. That is what the itemised lines are for. Boat galleys need thin, light material and radiused edges cut to a hull curve - it is a template-and-fabricate job, nothing about it is standard kitchen dimensions.

Canal-side streets are narrow with permit bays and bridge weight and width limits at Warwick Avenue, and several buildings back onto the towpath with no vehicle access at all. Stucco villas have a raised front entrance with six or seven stone steps. Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. It appears as its own line rather than buried in a rate. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop templating, worktop fabrication and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Material is the slab only, and it says so.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Slab yield is worked out at quote stage, so if the layout forces a second slab you hear it before you commit rather than after. No installed rate per square metre, because it is not a real number. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. This is the item most often left out of a cheaper quote, and it comes back as a variation once the templater has been. Priced as fabrication, not as area. Send the island size including the overhang and which side people sit at, the stool count, and confirm the edge profile you want and which edges are to receive it. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. Material is quoted as a supply range and the labour lines separately, because an installed rate per square metre is not a real number. Nothing payable until template.