Worktop replacement in Longthornton

Yes. Longthornton is on the patch, and the postcodes we work here are SW16. It is worked on our south west London run, along with the rest of Merton. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Original quarry-tiled floors sit lower than a later screed, so a run crossing that junction needs the units packed to one level. The junction between the old floor and the extension floor is where a run crossing it needs packing before stone goes on. Sound carcasses are the one condition. Extensions of this vintage often meet the original wall with a stepped floor level, so check whether the run crosses that threshold before assuming one continuous height.

Parking is unrestricted on most roads and driveways are common, though the streets are narrower here than in the Morden suburbs and get tight when both sides are parked. Side gates are the usual squeeze at around 750mm. Garden routes carry their own hazards: a drain cover, a step up to a patio, wet decking, or a lawn that will not take a loaded trolley. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. That is agreed before a plumber is booked.

It is one of the three we do most here, behind worktop installation. Same template visit, same workshop, same installers either way. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. We would rather find it at template than on the morning, which is why the templater looks behind the units. The laminate has been covering it up. Unlock the side gate and clear the alley of bins, bikes and pots, and arrange a plumber for the sink and an electrician if the hob is hard-wired. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Sound carcasses are the condition.