Worktop fabrication in Lots Road

Yes. Lots Road is on the patch, and the postcodes we work here are SW10. It is worked on our west London run, along with the rest of Kensington and Chelsea. The practical answer is to check the fixture list before the date is offered, because a template slot lost to a road closure cannot be recovered that week. Pieces are loaded in reverse fitting order so the first thing off the van is the first thing that goes down. It is decided in the yard, not at the kerb. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Poured screed over steel decking can fall away across a long run, so level is checked across the whole room before anything is packed. A deep scribe comes out of the nest, so how uneven the wall is changes which part of the slab a piece is cut from. The bench proves it before the van moves. If the building kept its old goods lift, use it and stop worrying about piece size - that is rare enough in SW10 to be worth planning the job around.

This is a working riverside corner with the creek, boatyards and ongoing construction traffic, so road closures and contractor gate control are routine and worth checking the morning of. New riverside blocks want a booked goods lift and a delivery slot, while the loft conversions often have a wide freight lift left over from the industrial use, which is the easiest access in the whole borough when it is available. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. So the nesting is worked to the measured route first and to the slab second. The drawing carries that decision through to the saw.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop templating. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Cutting several kitchens from different slabs and calling them matched is where firms get caught out. Proven on the bench before dispatch. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Pieces are dry-assembled and checked on the bench before anything is loaded. Nested for the job in front of us.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. A join that lands in the wrong place cannot be moved once the cut-outs are machined, so it is settled on the drawing. That is nested before any glass goes on the saw. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. Internal corners are machined with a radius and polished, and kept well clear of any join or cut-out. The drawing decides it, not the fitter. The island layout, including whether the ends are mitred down to the floor, needs settling before cutting, since mitred ends are cut in sequence with the top and dry-assembled as one unit. Access in a tenanted flat depends on the tenant, so the template and fitting dates are agreed with whoever actually holds the keys. Sink and hob are dry-fitted on the bench before dispatch, whoever supplied them. Dry-assembled before it leaves.