Worktop installation in Marylebone

Yes. Marylebone is on the patch, and the postcodes we work here are W1U, W1G, W1H. It is worked on our central London run, along with the rest of Westminster. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

External walls are thick and the run under the window sits in a deep reveal that has to be templated rather than assumed square. The porter has to be booked, the goods lift protected with the block's own blankets or our own boards, and communal carpet and stair runners covered from the entrance to the flat door before a single piece moves. That is the shape of the day. Estate leases restrict altering the layout, so you are usually working to exactly the same run positions as the old top - keep the old worktop as a reference until the new one is in.

Portered mansion blocks with a set of house rules - works hours typically 9 to 5 weekdays only, no weekends, lift protection mandatory, and the porter controls when you can bring materials through the front hall. Original lift cars will not take a full slab. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. We walk the route with a tape and protect it end to end before the first piece is lifted. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. One visit, with the sink and hob seated and sealed before we leave. One visit, done properly.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Have the works booking confirmed with the managing agent or porter in advance, with the lift slot and any parking permit or bay suspension in place. Quartz is the sensible default in a rental: nothing to seal, nothing to maintain, and nothing an incoming tenant needs briefing on. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.