Worktop replacement in Mill Hill

Yes. Mill Hill is on the patch, and the postcodes we work here are NW7. It is worked on our north London run, along with the rest of Barnet. Gravel and block paving both look like hard standing and neither takes a loaded trolley, so the run from tail lift to door gets boarded. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Doorways are low and narrow, which is a genuine constraint on piece length before anything else is considered. These are the multi-piece jobs: long runs, a large island and often a range cooker that cannot be moved, so the stone is templated in several pieces and how the vein runs across the joins matters. What is under the old top is the real question. Steep, narrow lanes around the village mean the material is better delivered on a smaller vehicle in two trips than on one big load that cannot turn.

The Ridgeway and the village lanes are narrow with sharp gradients and few passing places, so a large vehicle is a liability; the modern estates below have wide roads and long driveways with easy loading. Estate roads are often too tight for a long-wheelbase van to turn, so the carry starts a good deal further from the door than a map suggests. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. It sets what the day actually looks like.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop design & quotation, worktop installation and worktop fabrication. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. We would rather find it at template than on the morning, which is why the templater looks behind the units. The laminate has been covering it up. Have a fitter or joiner fix and level the island units beforehand, and get the sink, taps, hob and any range on site before templating so we cut to the actual appliances. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Sound carcasses are the condition.