Worktop installation in Mottingham

Yes. Mottingham is on the patch, and the postcodes we work here are SE9. It is worked on our south east London run, along with the rest of Bromley. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Walls are dense block or in-situ concrete with a bonded plaster, so the bottom course of tiles brings plaster with it when the old top comes off. The stairwell half-landing is usually the tightest point on the whole route and it dictates the maximum piece. That is the shape of the day. Galley runs this narrow leave under 900mm between opposing worktops, so we bring the pieces in on edge and set the second run before fitting the sink.

Wide estate roads with plenty of parking and short front paths, so the carry is short and flat, though many houses only have a pedestrian gate and no drive. Door width, hall width and the diagonal at the turn are three separate measurements, and it is the diagonal that catches people out. We walk the route with a tape and protect it end to end before the first piece is lifted. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.