Worktop replacement in Parsloes

Yes. Parsloes is on the patch, and the postcodes we work here are RM9. It is worked on our east London run, along with the rest of Barking and Dagenham. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Rear access through a garden or a shared path means long pieces can usually come in whole from the back. Ex-council flats and maisonettes are built in dense concrete and blockwork, so anything that has to be fixed back, such as brackets under a peninsula or support for an end panel, goes in with proper anchors and an SDS rather than plasterboard fixings. Units kept, surface changed, one day. Rental jobs here want durability over looks, so we push a thicker profile and a fully sealed sink cut-out rather than a delicate edge detail.

Consistent estate street layout with front gardens, hardstanding on some houses and rear service paths between the terraces, all with easy parking. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. It sets what the day actually looks like.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop splashbacks & upstands and worktop installation. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

A peninsula is an island with one end tied to a run, which means the join between them has to be planned rather than allowed to happen. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. We would rather find it at template than on the morning, which is why the templater looks behind the units. The laminate has been covering it up. Sort a parking bay or permit near the entrance, confirm the lift is in service and get us the door codes, and tell us about any asbestos survey on the flat before we start stripping out. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Units kept, surface changed.