Worktop installation in Putney Vale

Yes. Putney Vale is on the patch, and the postcodes we work here are SW15. It is worked on our south west London run, along with the rest of Wandsworth. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The back door frequently opens straight into the kitchen, which is the best carry route in the house and the one people forget to mention. Access is usually the easy part here, as most of these have a side gate and a back door straight into the kitchen, so we carry down the side alley rather than through the house and keep the mess outside. The slow parts are slow for a reason. Wall space is short here, so if a client wants a full-height stone splashback behind the hob, check the extractor bracket position first, it usually lands right where the panel edge would be.

The estate sits beside the A3 and is reached from a small number of entrances, so the approach has to be right first time or it means a long detour. Inside the estate the roads are quiet with unrestricted parking close to the doors. Door width, hall width and the diagonal at the turn are three separate measurements, and it is the diagonal that catches people out. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional.

The return piece is the awkward one on a slab: short, full depth, and rarely nesting neatly against the long lengths, so yield rather than area is what moves the material figure. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Eased in, never forced. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.