Worktop installation in Putney

Yes. Putney is on the patch, and the postcodes we work here are SW15. It is worked on our south west London run, along with the rest of Wandsworth. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

External walls are thick and the run under the window sits in a deep reveal that has to be templated rather than assumed square. This is the most managed day we do. The slow parts are slow for a reason. Assume the lift is unusable in the older blocks and plan piece sizes around the stair turn, a 2.4m maximum is a safer starting point than the room dimensions suggest.

The High Street is a red route with a bus gate and no stopping, and the surrounding streets are permit-controlled. Mansion blocks frequently have a small original lift that will not take a slab, meaning a stair carry up two or three flights with a half-landing turn each time. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional.

The free end is what needs deciding early: square edge, mitred apron down the end, or a full waterfall to the floor, and a waterfall is cut in sequence off the same part of the slab. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Nothing is bonded until the whole run sits flat. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Have the works booking confirmed with the managing agent or porter in advance, with the lift slot and any parking permit or bay suspension in place. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.