Worktop design and quotation in Roundshaw

Yes. Roundshaw is on the patch, and the postcodes we work here are SM6. It is worked on our south London run, along with the rest of Sutton. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Rear access through a garden or a shared path means long pieces can usually come in whole from the back. Kitchens in this stock are usually compact and reasonably square, so total area is modest, but the fixed lines do not shrink with it. You see it before you commit to anything. With the washing machine in the worktop run the cut-outs sit close together, so the piece needs a support rail across the appliance gap or it will flex when the machine spins.

Parking courts and pedestrian decks rather than roadside frontage, controlled bollards on some routes, and communal entrances to the flatted blocks with an intercom. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. That is why the fitting line on a quote reflects manpower and time rather than square metres. Nothing about it gets estimated after the fact.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Nothing payable until we template. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Material is the slab only, and it says so.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Better on the quote than in a variation. Send the run lengths plus a photo of every corner of the kitchen so we can spot boxed ducts, and tell us whether the sink is staying in the same position. These kitchens tend to be compact and reasonably square, so the fixed template, fabrication and fitting lines are a larger share of the total than the stone is. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Written to be read by whoever is paying.