Worktop design and quotation in Somers Town

Yes. Somers Town is on the patch, and the postcodes we work here are NW1. It is worked on our central and north London run, along with the rest of Camden. Where the frontage is a clearway the unload happens away from the door and the carry gets longer, which is a crew and time question rather than a stone one. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Balcony access and long communal corridors are often the carry route, and both are narrower than they look with a piece on edge. The building rather than the kitchen is what you are paying for here, so template, fabrication and fitting are broken out separately. Priced from the building, not from a rate card. Larder and meter recesses in these blocks generate a lot of small returns and cut-outs, so the fabrication list runs longer than the overall run lengths suggest.

Estate courtyards with bollards and controlled gates, narrow internal stairwells, and lifts only in the taller blocks. Euston Road and Pancras Road are red routes, so unloading happens inside the estate or it does not happen at all. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. That is why the fitting line on a quote reflects manpower and time rather than square metres. Nothing about it gets estimated after the fact.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop splashbacks & upstands and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Nothing payable until we template. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Material is the slab only, and it says so.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. No installed rate per square metre, because it is not a real number. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Alcove pieces get cut oversize on both scribe edges, with the true wall angles carried on the template drawing rather than assumed. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Better on the quote than in a variation. Measure the internal lift car, width, depth and height, and photograph the stair turn and landing doors, then send those with the run lengths. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Written to be read by whoever is paying.