Splashbacks and upstands in Somers Town

Yes. Somers Town is on the patch, and the postcodes we work here are NW1. It is worked on our central and north London run, along with the rest of Camden. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. Panels come off the van in one trip where possible, since a tall piece handled repeatedly is a piece asking to be chipped. Handling is where these pieces get damaged. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The original kitchen was a small service room, so what is there now is a knock-through and the junction between the two floors is rarely level. Boxed risers break the run into returns, and every return is a separate piece with its own mitred corner. The wall makes that decision, not the brochure. Larder and meter recesses in these blocks generate a lot of small returns and cut-outs, so the fabrication list runs longer than the overall run lengths suggest.

Estate courtyards with bollards and controlled gates, narrow internal stairwells, and lifts only in the taller blocks. Euston Road and Pancras Road are red routes, so unloading happens inside the estate or it does not happen at all. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. Where the route is tight we break a long splashback at a natural vertical joint instead of forcing one panel through. It decides panel size before anything is cut.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Splashbacks and upstands are cut from the same slab run at the same time, which is the only way the batch actually matches. Same batch, same run, same day. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Socket and switch positions have to be final before templating, because a cut-out in the wrong place means a new piece. Sockets final before template.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. The same shape decides where splashback pieces break, and a joint in a corner reads as a detail while one in a clear run reads as a mistake. Corners get their own pieces. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. A tall panel that fits at the worktop will stand off the wall at the top unless the wall is dubbed out or the panel is scribed. An upstand rides what a panel exposes. The riser boxing must be finished in its final form and any access panel positions agreed before the template, since the stone is set out around them. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. Full-height panels need the wall made good first, which is another trade and another timescale. Decided before fabrication, not after.