Worktop replacement in South Acton

Yes. South Acton is on the patch, and the postcodes we work here are W3. It is worked on our west London run, along with the rest of Ealing. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Walls are dense in-situ concrete or blockwork with a thin skim, which will not be chased back and will not take a plasterboard fixing. The plaster is bonded straight onto the concrete, so the bottom course of tiles tends to bring plaster with it when the old top comes off, leaving a rough band behind the upstand. Units kept, surface changed, one day. The road layout changes as the phases move, so confirm the current access route in the week of the fit rather than relying on the survey visit.

A large estate under phased construction, so hoardings, site traffic and changing road layouts. Blocks have goods lifts, but access is arranged through the managing agent rather than the resident. The lift has to be booked and blanketed before anything moves, and that booking needs to cover the old tops coming out as well as the new stone going in. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop splashbacks & upstands. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Upgrading a builder-finish kitchen is mostly a swap, so the cost sits in the material choice rather than in the shape of the room. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Sort a parking bay or permit near the entrance, confirm the lift is in service and get us the door codes, and tell us about any asbestos survey on the flat before we start stripping out. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Sound carcasses are the condition.