Worktop templating in St Paul's Cray

Yes. St Paul's Cray is on the patch, and the postcodes we work here are BR5. It is worked on our south east London run, along with the rest of Bromley. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. A templater circling for a space arrives late into a slot that was already tight, and the drawing is what suffers. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

There is nearly always a boxed service duct or a stopcock cupboard in one corner, and it eats into the usable depth of the run. Concrete and dense block walls in ex-council stock cannot be chased back or packed out to suit, so the template takes the wall exactly as it is and the stone carries the scribe. Two to three hours, once the units are in. Existing base units on this stock are often out of level by 10mm or more, so we shim and check against a datum before setting down, otherwise the joint opens up.

Wide estate roads and space to park, but long shared footpaths from the road to individual front doors and a lot of properties with only a pedestrian gate. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. A template taken without walking the route produces a drawing that cuts beautifully and will not go in. It goes on the drawing with the run dimensions.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. No stone is ever cut from a plan, which is inconvenient exactly when a programme is tight. The room as it is, not as it was drawn.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. A layout templated off one wall instead of one datum will not sit right once all the pieces are down together. Real angles, not plan angles. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Level has to hold across the whole room rather than along one wall, or a floor that falls end to end shows as a step where two pieces meet. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Measured at worktop height, nowhere else. Every base unit fixed to the wall, packed and levelled, and any dry-lining or patching completed - the template reads the wall face it is given, so that has to be the finished face. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. The template happens when the units are in, fixed and level, whoever is fitting them. Fitted, fixed and level, then we come.