Worktop installation in St Paul's Cray

Yes. St Paul's Cray is on the patch, and the postcodes we work here are BR5. It is worked on our south east London run, along with the rest of Bromley. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Low-rise blocks are three or four storeys with a single stair and no lift, so pieces go up on edge and the half-landing sets the maximum length. The carry is the constraint. The slow parts are slow for a reason. Existing base units on this stock are often out of level by 10mm or more, so we shim and check against a datum before setting down, otherwise the joint opens up.

Wide estate roads and space to park, but long shared footpaths from the road to individual front doors and a lot of properties with only a pedestrian gate. The side passage is the measurement that matters, because a piece has to be carried flat down it and then turned in at the back door, and the turn is always tighter than the passage. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Level has to hold across the whole room rather than along one wall, or a floor that falls end to end shows as a step where two pieces meet. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Eased in, never forced. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. These kitchens tend to be compact and reasonably square, so the fixed template, fabrication and fitting lines are a larger share of the total than the stone is. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Access for the whole slot, or a different day.